Chrysler 2014 300 - User Guide - Manual (Page 105)

SRT
Component
Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant – 6.4L Engine
We recommend you use
MOPAR® Antifreeze/Coolant
Ten Year/150,000 Mile
Formula OAT (Organic
Additive Technology).
15.2 Quarts (14.4 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level.
Engine Oil With Filter –
6.4L Engine
For best performance and maxi-
mum protection under all types
of operating conditions, the
manufacturer only recommends
full synthetic engine oils that
meet the American Petroleum
Institute (API) categories of SN.
The manufacturer recommends
the use of Pennzoil Ultra™
0W-40 or equivalent MOPAR®
engine oil meeting the require-
ments of Chrysler Material
Standard MS-12633 for use in all
operating temperatures.
7 Quarts (6.6 Liters)
Engine Oil Filter
We recommend you use
MOPAR® brand Engine
Oil Filters.
—
Spark Plugs – 6.4L Engine
We recommend you use
MOPAR® Spark Plugs
(Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
Use only ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4® fluid may affect
the function or performance of
your transmission. We recom-
mend MOPAR® ATF+4® fluid.
—
Axle Rear
We recommend you use
MOPAR® Synthetic Gear
Lubricant SAE 75W–90
(API GL-5) (with MOPAR®
Friction Modifier – Hypoid
Gear Additive).
—
Power Steering Reservoir
We recommend you use
MOPAR® Power Steering
Fluid + 4, MOPAR® or ATF+4®
Automatic Transmission Fluid.
—
Fuel Selection – 6.4L Engine
Premium Unleaded 91 Octane
Only or higher.
19 Gallons (72 Liters)
(Approximate)
M A I N T A I N I N G Y O U R V E H I C L E
103