beautypg.com

Using the panic alarm, Power open/close power liftgate — if equipped – Chrysler 2013 Country - Owner Manual User Manual

Page 27

background image

Using The Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off, and the interior lights will turn on.

The Panic Alarm will stay on for three minutes unless
you turn it off by pressing the PANIC button a second
time or if the vehicle is driven above 5 mph (8 km/h).

NOTE:
• When you turn off the Panic Alarm by pressing the

PANIC button a second time, you may have to move
closer to the vehicle due to the Radio Frequency (RF)
noises of the system.

• The Panic Alarm cannot be activated if the engine is

running.

Power Open/Close Power Liftgate — If Equipped

Press the LIFTGATE button twice on the RKE transmitter
within five seconds to Open/Close the Power Liftgate.
If the button is pushed while the liftgate is being power
closed, the liftgate will reverse to the full open position.

The power liftgate may also be opened and closed by
pressing the LIFTGATE button located on the overhead
console.

If equipped with a rear interior switch on the left rear
pillar, pushing this switch once will close the liftgate only.
The liftgate cannot be opened from this switch.

If the vehicle is locked and Vehicle Security Alarm is
armed, using RKE transmitter to open the power liftgate
does not unlock the vehicle or disarm the Vehicle Security
Alarm.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

25

This manual is related to the following products: