Chrysler 2012 200 Convertible - User Guide - Manual (Page 14)

• The top tether strap anchorages are located in the trunk behind the rear seatback. The
access ports to the top tether anchorages are directly behind the seat headrests under a
plastic cover.
• Loosen the child seat adjusters on the lower straps and tether straps so that you can
attach the hook or connector to the lower and tether anchorages more easily.
• Attach the lower hooks or connectors over the top of the seat cover material.
• If lowered, raise the convertible top.
NOTE: The convertible top must be in the UP position to access the tether anchor.
• Open the access port cover behind the seat where you are placing the child restraint.
• Push the tether strap and hook through
the access port and down into the trunk.
NOTE: Route the tether strap to provide the
most direct path from the child seat to the
anchor.
• From inside the trunk, open the access
cover on the carpet covering the back of
the seat and attach the tether strap hook
to the anchor.
• Tighten all three straps as you push the
child restraint rearward and downward into
the seat.
GETTING STARTED
12