Chrysler 2012 300 SRT - User Guide - Manual (Page 18)

FRONT SEATS
Power Seats
• The power seat switches are located on
the outboard side of the front seat
cushions.
• The seat switch controls, forward/
backward, up/down or to recline the seat.
The passenger’s seat will move up or
down, forward or rearward.
• The recline switch controls the angle of
the seatback. Press the switch forward or
rearward and the seatback will move in
either direction.
Power Lumbar
• Push the switch forward to increase the
lumbar support. Push the switch rearward
to decrease the lumbar support.
• Pushing upward or downward on the
switch will raise and lower the position of
the support.
Memory Seat
• The memory seat feature allows you to
save two different driver seating positions,
driver's outside mirror, adjustable brake
and accelerator pedals, power tilt and
telescopic steering column and radio
station preset settings. The memory seat
buttons are located on the driver's door
panel.
• Adjust all memory profile settings, press
the SET (S) button then press 1 or 2 within
five seconds.
• Your Key Fob can be programmed to recall one of two pre-programmed memory profiles
by pressing the UNLOCK button on the Key Fob.
• To program your Key Fobs, perform the following:
• Change the ignition to OFF.
GETTING STARTED
16