With keyless enter-n-go — if equipped, Towing a disabled vehicle – Chrysler 2011 300 - Owner Manual User Manual
Page 427

With Keyless Enter-N-Go — If Equipped
If the engine is running, press the START/STOP button to
turn it off. Release the brake pedal and press the START/
STOP button once or twice to go to the ON/RUN
position. Do not start the engine. Then, follow the in-
structions shown above to activate the override.
TOWING A DISABLED VEHICLE
Towing Condition
Wheels OFF the Ground
RWD MODELS
AWD MODELS
Flat Tow
NONE
IF Transmission is operable:
• Trans in NEUTRAL
• 30 mph (48 km/h)max speed
• 15 mi (24 km) max distance
NO
Wheel Lift
Front
NO
Rear
OK
Trans in NEUTRAL
Flatbed
ALL
BEST METHOD
OK
Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for the purpose, following equip-
ment manufacturer’s instructions. Use of safety chains is
mandatory. Attach a tow bar or other towing device to
main structural members of the vehicle, not to bumpers
or associated brackets. State and local laws applying to
vehicles under tow must be observed.
If you must use the accessories (wipers, defrosters, etc.)
while being towed, the ignition must be in the ON/RUN
position, not the ACC position.
6
WHAT TO DO IN EMERGENCIES
425