Chrysler 2009 Sebring Convertible - Quick Reference Guide - Manual (Page 5)

V
e h I c l e
F
e at u r e s
Speed Control Lever
CrUISE on/oFF
• Press the on/oFF button to activate the Speed Control.
• CrUISE will appear on the instrument cluster to indicate the
Speed Control is on.
•
Press the on/oFF button a second time to turn the system off.
SEt
• With Speed Control on, press down and release the lever to set
a desired speed.
aCCEL/dECEL
•
Press and hold the lever up to accelerate or down to decelerate
the vehicle; release the lever to save the new set speed.
•
once a speed is set, tapping the lever up or down will increase
or decrease the set speed approximately 1 mph (2 km/h).
CanCEL
•
Pull the lever toward you, or apply the brakes to cancel the
set speed and maintain the set speed memory.
•
Press the on/oFF button to turn the system off and erase the
set speed memory.
rESUME
•
to resume a previously selected set speed in memory,
push the lever up and release.
Express Down Window Feature
• Press the key fob UnLoCk button once and release, then
immediately press and hold the UnLoCk button again to lower all
windows to the desired position.
Push ON/OFF
Button
175480_09a_Sebring_Conv_QRG_110308.indd 5 11/3/08 2:51:32 PM