To deactivate, To resume speed – Chrysler 2007 Crossfire User Manual

Page 104

Text mode
Original mode

To Deactivate

A soft tap on the brake pedal, or normal brake pressure
while slowing the vehicle, will deactivate the speed
control without erasing the memory. Pushing the speed
control lever forward or turning the key in the ignition
switch to the OFF/LOCK position will turn off the speed
control and erase the memory.

To Resume Speed

To resume a previously set speed, pull the speed control
lever toward you, and then release. The resume feature
can be used at any speed above 20 mph (30 km/h).

NOTE:

Moving the gear selector lever to the “N”

position will switch the speed control off (automatic
transmission only).

104

UNDERSTANDING THE FEATURES OF YOUR VEHICLE