Using the tuner, Setting the am tuner interval spacing, One touch radio – JVC FS-X 3 User Manual

Page 16: Tuning in a station, 1 press the fm/am button, Manual tuning, Auto tuning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Tuner

Numeric

Keys

SET

FM/AM

FM/PLAY MODE

рм

Г I I

FM mode indicator

of . □ (5,

It-

Band display, Preset channel,
Frequency display

When the System is in use, the displsy shows other items as well.

For simplicity, we show here only the items described in this section.

You can listen to FM and AM stations. Station.s can be tuned
in manually, automatically, or from preset memory storage.

□ Before listening to the radio:

• Make .sure that both the FM and AM antennas are cor

rectly connected. (See pages 5 and 6).

Setting the AM Tuner Interval Spacing

When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: 9 kHz except for South and Central
America). You can change it to 10 kHz or 9 kHz spacing.

To select 10 kHz intervals,

while holding down the

button on the Unit in Standby mode, press the STANDBY/
ON

(!)/l

button on the Unit to turn on the power. “AM

lOkHz STEP” will appear on the display.

To select 9 kHz intervals,

while holding down the

button on the Unit in Standby mode, press the STANDBY/
ON 0/| button on the Unit to turn on the power. “AM 9kHz
STEP” will appear- on the display.

(10 kHz interval)

•

When you change the setting, the preset AM stations are

erased. You will need to preset the station again. (See

page 14.)

One Touch Radio

Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.

□ You can switch from any other sound source to the radio

by pressing the FM/AM button.

Tuning In a Station

Press the FM/AM button.

The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be
tween FM and AM.
• You can al.so select the band by turning the Source

selector on the Unit.

FM AM

(On the Remote Control)

Select a station using one of the foiiow-

ing methods.

• Manual Tuning

Press the or button on the Unit or the A or

button on the Remote Control repeatedly to move

from frequency to frequency until you find the station
you want.

• Auto Tuning

If you press and hold the or button on the
Unit or the A or ▼ button on the Remote Control
for one second or more, the frequency changes up, or

down, automatically until a station is found.