Troubleshooting – JVC KD-S575 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
Insert the CD correctly.
• CD sound is sometimes
interrupted.
You are driving on rough
roads.
Stop CD play while driving
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on the
display.
No CD is in the loading slot.
Insert a CD into the loading
slot.
CD is inserted incorrectly.
Insert it correctly.
• Sound cannot be heard from
the speakers.
The volume control is turned
to the minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Check the cords and
connections.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Signals are too weak.
Store stations manually.
• Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
• CD can be neither played
back nor ejected.
The CD player may function
incorrectly.
Press 6/l/ATT and
±
at the
same time for more than 2
seconds. Be careful not to
drop CD when it is ejected.
• The unit does not work at
all.
The built-in microcomputer
may function incorrectly due to
noise, etc.
Press (l)/i/ATT andSELat
the same time for more than 2
seconds to reset the unit. (The
clock setting and preset
stations stored in memory are
erased.) (See page 3.)
23