Tape operation, Tape play, Automatic stop – RCA RP-1820 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE OPERATION
TO INSERT OR REMOVE CASSETTE
1. Press STOP button to ensure tape mechanism is not engaged.
2. Lift open Cassette Carry Door.
3. Insert cassette gently, sliding it into the Cassette Carry Door with expos
ed tape upward, and the full reel of tape to the right (toward the tuning
knob).
4. Close the door.
TAPE PLAY
1. Set VOLUME to minimum.
2. Plug headphone into jack on cabinet side, insert cassette, and then
press PLAY.
3. Adjust VOLUME. Increase only alter headphone is in place for listening.
4.
To turn unit off, press STOP.
5. To skip over a portion of the tape, press F-FWD. Use STOP after you
have advanced to the desired point on the tape.
6. To run the tape backwards, press REWIND. Press STOP after you have
rewound to the desired point.
AUTOMATIC STOP
When the end of the tape is reached in PLAY mode, the unit will automatically
shut itself off and return the button to the "off" position.