Uniden PRO 540e - Manual (Page 7)

TROUBLE SHOOTING
[f your PRO 540e is not performing up to your expectations, please try these
simple steps. If you still cannot get satisfactory results after reading this manual
and following the trouble shooting steps, please call your local dealer:
Trouble Check
Unit will not turn on.
No power. 1. Check power cord and all
connections.
2. Check power cord fuse.
3. Check vehicle electrical system.
Poor reception !. Check and adjust Squelch.
2, Check antenna system and cable, connec­
tors.
3. Check operation mode of the radio.
Weak transmission 1. Check antenna system and cable, connec­
tors.
2. Check antenna grounding.
3. Check for corrosion on connectors.
If you determine that service is necessary contact your local dealer or pack the
unit in its original carton. Send it along with a brief, concise description of the
problem, your name, address, phone number, and a copy of the original pur­
chase receipt to the address listed in the warranty,
SERVICING YOUR CB
Technical information, diagrams and charts will be provided upon request. It is
the user's responsibility to see that this radio is operating at all times in accord­
ance with the D.O.C. Citizens Radio Service regulations. We highly recommend
that you consult a qualified radiotelephone technician for service and alignment
of this radio. When ordering parts, it is important to specify the correct model
number and serial number of this radio.
Please refer to the WARNING information on the first page of this manual.
- 6 -