Kenwood CAW1301-05 User Manual
Radio mounting kit installation instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KIT ASSEMBLY INSTRUCTIONS
Double DIN & Double ISO Mount Applications
1) Remove the Shaded tab from the bottom of each left and right
mounting bracket (see Fig. B below).
2) Cut and remove center rib from main bracket for double DIN and double
ISO applications
3) Attach the left and right side brackets to the main bracket,
4) Attach climate controls to the top of the kit using factory screws.
5) Fnr rtniihip DIN radio applications ONLY cut and remove center rib from
and file edges smooth.
6) Follow steps 5-7 from single ISO instructions on page 2.
7) Attach a rear support bracket to the rear oi the radio components and adjust
as needed to allow rear support bracket to rest in the sub-dash.
NOTE:
ISO kim ring ^
^ mysl be used in ploc& of ofreF'markel radioes Irtm rtngs. For ISO mounf oppli mounl ahef-markei mdio components to side brackets using screws provided with radio when possible or 2-DIN CAW-1301-05 1198-2003 LEXUS GS 300 RADIO MOUNTING KIT INSTALLATION INSTRUCTIONS
1198-2003 LEXUS GS 400