Setting the squelch, Scanning programmed channels, Setting the squelch scanning programmed channels – Uniden UBC60XLT User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Squelch

1. Turn until hiss heard.

This action lowers the
“squelch gate,” allowing

all signals and noise to
get through.

No signal should be
present when adjusting

squelch.

Scanner doesn’t scan

with squelch open.

This action raises the
“squelch gate,” allowing

only strong signals to get

through.

Scanner should begin
scanning after two
seconds.

Note: You must have at
least one channel

programmed before the

UBC60XLT

Will

scan.

Scanning Programmed Channels

Turn the scanner on.

Channel numbers

advance rapidly.

Note: When you turn the
scanner on, it wilt always
be in Scan mode.