Manual step-search, Manual channel selection, Lockout – Uniden UBC 175xL User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MANUAL STEP-SEARCH
Your Uniden® Bearcat® 175XL has the ability to be stepped, one frequency
at a time, either up or down throughout its search range. This feature is helpful
in tuning in a frequency or for stepping to any new frequency within search limits.
To Step-Search while in search mode:
PRESS:
PRESS:
HOLD n
HOLD J repeatedly to step upward to the desired higher
frequency.
OB:
PRESS:
PRESS:
HOLD
LIMIT
repeatedly to step downward to the desired lower
frequency.
MANUAL CHANNEL SELECTION
If you wish to select a specific channel to monitor, two methods are provided:
PRESS:
^ANUA^ repeatedly until the desired channel number
appears.
OR, Direct Channel Access:
PRESS:
CHANNEL NUMBER |
MANUAL I
LOCKOUT
You may wish to lock out certain frequencies and skip over them when scan
ning. To program Lockout on a channel (example 5), first select that channel
manually.
PRESS: □
PRESS;
Display:
MANUAL
LOCKOUT
LOCKOUT The lockout message will be displayed.
To remove Lockout:
PRESS:
lockout
"! 3gain and the message will disappear.
NOTE: If all channels are locked out, the scanner will go into manual mode.
This may be eliminated by removing lockout from one channel.
1 0