Kenwood 6188EP - Manual (Page 3)

HOW TO USE YOUR HEATER
FITTING THE WHEELS
Remove the feet with the bracket wheels from the polystyrene packing. Turn the radia­
tor upside-down and rest on the polystyrene.
Fit the wheels to the spindles on the feet and push firmly until they click into position.
Pull each wheel to check that it is correctly inserted.
The feet with the casters must be fitted with two arc-shaped brackets only between the
1st and 2nd element and the penultimate (see fig. 1 to 3 inclusive).
tig. 1
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location. Your
heater will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
Do not use this radiator in rooms having a surface area less than 4 m^(43 sq. ft.).
2. CONNECTION
The radiator must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working conditions.
Keep loose clothing or bedding, furniture and flammable materia! away from the wall
outlet where the heater plug is fitted in.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.