Uniden MC 790 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

® REMOTE Speaker Connector
...
If
you
desired
to
use
another
speaker in addition to the one in the un
it,
3
four oreighr ohm speaker equipped
with a miniature phone plug may Pe
connected C
0
| this jack.
@ DC Power Connector . . . Battery
connections are to be made with the
cable supplied to mate with this con
nector. Remember, red is -r, black is —.
The power cord is equipped with a fuse
to protect the radio. Use only a Six (
6
)
AMPERE fast blow fuse for replacement.
Note: Ttie radio must he connected i;j a
power-..source for' the rrii'merry to fun¡ hurí
properly. Remember not-to disconnect tfte
power cable, or you will lose the memory.
However, when this unit is not going tr> be
used for a long period of time, be sure to
disconnect the power cable for safety be
cause the current of less than 1 mA is fed ior
memory back-up even after the radio is
OFF. [But in this case, you will lose the
memory.)
@ ANT Connector . . . This connec
tor is for connection of the antenna. A
type PL259 connector is required to
■ make proper connection.