Specifications – Uniden MC-4700 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SPECIFICATIONS
GENERAL
Channels
Frequency Range
Frequency Control
Frequency Tolerance
Frequency Stability
Operating Temperature Range
Microphone
Input Voltage
Current Drain
Cabinet Dimensions (mm)
Weight
Antenna Connector
Meter
Indicators
10 AM, 10 USB
27.680 to 27.980 MHz
Phase Locked Loop(PLL) synthesized circuitry
±0,005%
0.001%
-20'’C to +50“C
Plug-in type, dynamic with push-to-talk switch
and coiled cord
13.8V DC nominal, 15.9V max,, 11.7V min.
(positive or negative ground).
Transmit: AM full mod., 2.2A; SSB 12 watts PEP
output, 2A.
Receiver: AM & SSB with maximum audio
output, 0.6A.
185(W)
X
231(D)
X
58(H)
3.3 Lbs (1.52 kg)
UHF, SO-239
Illuminated; indicates relative power output and
received signal strength, green receive LED.
LED display; channel, channel 88, TX/RX and
AM/SSB.
TRANSMITTER
Power output
Modulation
Intermodulation Distortion
SSB Carrier Suppression
Unwanted Sideband
Frequency Response
Output Impedance
SSB Filter
Output Indicators
AM, 4 watts
SSB, 12 watts, P.E.P.
AM, high and low level
SSB: 3rd and 5th order, better than —25 dB.
7th and 9th order, better than —35 dB,
Better than —55 dB
Better than —50 dB
AM and SSB: 350 to 2500 Hz.
52 ohms, unbalanced
10.695 MHz, 8 pole monolithic type
Meter shows relative RF output power; red
transmit LED.
2 -