V.e.t. switch & operation chart – Uniden VS2000XR User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

V.E.T. SWITCH & OPERATION CHART
Valet Mode is useful when unloading groceries, or servicing the car. To activate the
valet mode, turn the ignition key on and press the V.E.T. switch once. Mow the alarm
will not arm. If you wish to deactivate the valet mode, turn the ignition on and press
the V.E.T. switch once. Mow the alarm can he armed.
Emergency disarm is a back-up method of disarming the alarm in case the
transmitter is lost or stolen. To disarm the alarm, first open a door. The alarm will
begin to sound. Turn the ignition key on and then press the V.E.T. switch once.
Temporary disarm can be used to temporarily disarm the alarm if the alarm Is
programmed for automatic arming. This is useful when leaving the car for a short
period of time such as during a stop at a gas station. To operate, turn off the ignition
key and press the V.E.T. switch once before opening any door. If you change your
mind and wish to leave the car for an extended time, press the transmitter button to
arm the alarm. The temporary disarm feature is automatically disengaged once the
ignition is turned on.
V.E.T.
SWITCH
FUNCTIONS
Valet
V: Mode
P, Emergency
disarm
__ Temporary
'" disarm
ACTIVATE
VALET
DEACTIVATE
VALET
EMERGENCY
DISARM
TEWIPORARY(ITIME)
DISARM OF AUTOMATIC
ARMING [SEE NOTE U£}
STEP 1
DISARM THE
ALARM
TURN IGNITION
SWITCH ON
THE ALARM IS
ALREADY ARMED
DISARM THE ALARM
STEP 2
TURN IGNITION
SWITCH ON
PRESS V.E.T,
SWITCH ONCE
OPEN DOOR
(SIREN WILL
SOUND)
TURN IGNITION
SWITCH FROM ON
TO OFF
STEP3
PRESSV.EX
SWITCH ONCE
TURN IGNITION
SWITCH OFF
TURN IGNITION
SWITCH ON
PRESS V.E.T.
SWITCH ONCE
(NOTE 4)
STEP 4
TURN IGNmON
SWITCH OFF
ALARM iS NOW IN
VALET MODE
ALARM CAN NOW
EE ARMED
PRESS V.ET. SWITCH
ONCE. ALARIv! IS
DISARMED
LEAVE CAR. ALARM
WILL NOT ARM FOR
THIS ONETIME
ONLY
LED
STATUS
LONG FU^SH ON
^NOTE 3)
led
JS OFF
LED 13 OFF
LED IS OFF
NOTE 1; AUTOMATIC ARMING - Alarm will arm automatically 15 seconds after the last door
is shut. However, if you wish, you can arm the alarm manually after the last door is
shut, by pressing the transmitter button once.
NOTE 2: Two ways to remove the 'lemporary disarm of automatic arming" feature:
(1) Close ail doors and press the transmitter button once. The alarm will "chirp"
and arm.
(2) Turn the ignition key from off to on, then back to off. The alarm will go back to the
“automatic arming" mode.
NOTE 3: When the VS2000XR is fully armed, the LED vdli flash 0.5 second on, 1.5 seconds
off. When in valet mode, the LEO will flash 1.5 seconds on, 0.5 second off. This
protects the car in valet mode, as a thief v/ili see the Hashing LED and assume the
alarm is armed.
.
NOTE A: Press the V.E.T. switch once before opening any door.