Concord Camera 2040 - Manual (Page 7)

LOADING THE BATTERIES
The camera uses 2x AA batteries.
1. Slide the Battery/Memory Card Door towards the center of the camera, and lift the
Battery/Memory Card Door to open.
2. Insert the batteries with the positive terminal toward the ( + ) sign, and the negative
terminal toward the ( – ) sign.
3. Close the battery/memory card door.
CHECKING THE BATTERY LEVEL
The battery level is displayed on the LCD.
(Green, Full) (Red, Low)
Note:
• Remove the battery from the camera if it will not be used for an extended period of time
to prevent corrosion or battery leaks.
• To extend battery life, the camera will automatically power off after 60 seconds of
inactivity. To change this setting, please refer to page 25.
6
GETTING STARTED
En
The battery is full
and ready to use.
The battery is low
and it needs to
be replaced soon
fig.1.1 fig.1.2 fig.1.3
2040 Manual-4L (512950-00) 2003:09:06 2:05 PM Page 6