Charmglow 720-0289 - Manual (Page 19)

18
LIGHTING ILLUSTRATIONS
Main& side burner lighting illustration
Step 1: Make sure the lid is open.
Step to light the rotisserie burner:
Push and turn the rotisserie knob to ”IGNITE/ON”
position and hold for 3~4 seconds, then push
electronic ignition button at the same time until burner
Step to light the searing burner:
Push and turn the searing knob to “IGNITE/HI”
position and hold for 3~4 seconds to light the burner.
Once it islit, release electronic igniter and still hold in
the sear burner knob for another 15 seconds to be
sure the burner stay lit
Step 2. Push and turn main or side burner knobs
to ”IGNITE/HI” Ignition. Pilot torch will light. Hold
for 3~4 seconds until burner is lit.
Step 3. You may need to try 3 or 4 times to light
the burner. After the burner is lit, adjust the knob
as desired.
Rotisserie & Searing burner lighting illustration
K15Y06P-1
If ignition does not occur in 5 seconds, turn
the burner knob to OFF, wait 5 minutes and
repeat the lighting procedure.