Chicago Electric 95283 User Manual
Gas powered polesaw/pruner 1 hp, Assembly and operating instructions
©
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Do to continuing improvements, actual product may differ slightly from the product described herein.
You do not operate the Polesaw/Pruner with the proper 50:1 fuel mix in its fuel tank.
Never run the Engine with an improper fuel mix, low or no fuel mix.
Running the Engine with an improper fuel mix, low or no fuel mix, will permanently damage the unit.
CAUTION!
Your Warranty Is Voided If:
®
Copyright
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
GAS POWERED
POLESAW/PRUNER
1 HP
Model 95283
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
- Auto-darkening Welding Helment with ANSI-Approved Lens 91214 (10 pages)
- 10" Compound Miter Saw with Laser Guide 69683 (20 pages)
- 95629 (39 pages)
- 12V Lithium-Ion Multifunction Tool 67707 (15 pages)
- 96405 (19 pages)
- 44567 (28 pages)
- Electric Impact Wrench 68099 (16 pages)
- 1/2" vaRiaBle SPeeD ReveRSiBle HEAVY DUTY DRILL 69452 (16 pages)
- 96035 (20 pages)
- 94882 (16 pages)
- 94739 (20 pages)
- CORDLESS SPRAY GUN 90880 (14 pages)
- MIG-100 91124 (13 pages)
- 9"Angle Grinder 93179 (12 pages)
- Heavy Duty Oxy - Acetylene Welding Outfit 92496 (20 pages)
- 18 Volt Corldess Impact Driver 68853 (12 pages)
- 67616 (16 pages)
- 91332 (8 pages)
- 12V Lithium CordLess drill 69360 (14 pages)
- 7" Angle Grinder 69454 (20 pages)
- Power Tools/ Electric Drywall Screwdriver 9624 (12 pages)
- 1/3 Sheet Finishing Sander 94338 (12 pages)
- Wire Feed Welder MIG 170 (32 pages)
- 97717 (15 pages)
- STUD WELDER DENT REPAIR KIT 3223 (9 pages)
- 99702 (22 pages)
- 68568 (12 pages)
- 45338 (15 pages)
- Power Tools 12" DOUBLE-BEVEL SLIDING COMPOUND MITER SAW WITH LASER GUIDE 69684 (20 pages)
- Circular Saw with Laser 95004 (18 pages)
- Power Tools / 1" Variable Speed SDS Rotary Hammer 69276 (16 pages)
- 12V Cordless Auto-Hammer 68364 (12 pages)
- Flexible Shaft Grinder/Carver 40432 (12 pages)
- 47991 (8 pages)
- 40388 (17 pages)
- MIG 200 93804 (36 pages)
- Stapler/Nailer 93749 (12 pages)
- 98107 (20 pages)
- 92880 (16 pages)
- 7.5 Amp Reciprocating Saw 69067 (16 pages)
- 66127 (12 pages)
- HARBOR FREIGHT TOOLS 98753 (11 pages)
- 67845 (16 pages)
- 1/2'' Electric Impact Wrench 45252 (16 pages)
- 14 Industrial Cut-off Saw 68104 (12 pages)