Carbine PLUS-6900 - Manual (Page 15)

Enter Timer Start:
1. Press the button twice to remote start the vehicle.
2. Let the engine run and wait for the parking lights to turn on or start flashing. Press the
button once then press and hold the button. The parking light will flash
3 times and the siren or horn will chirp 3 times and the icon will appear on
the LCD display. The vehicle is now programmed to start every 3 hours.
3. Press the brake pedal to shut off the engine.
Exit Timer Start:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition “ON”. The LED and parking lights will flash 4 times. The horn
chirps 4 times. The vehicle is no longer programmed to Timer Start
automatically.
Or
1. Press the button twice to remote start the vehicle.
2. As soon as the parking lights have turned on or flashing, press the button once. Then press
and hold the button. The parking lights will flash 4 times. The siren or horn chirps 4 times.
The vehicle is no longer programmed to Timer Start automatically.
15
When the engine is running by remote start and you wish to shut it off, follow
these steps:
1. While in Remote Start Mode, press the button twice on the remote
transmitter.
2. Move the optional remote start toggle switch to the “OFF” position (if
installed).
3. Press the vehicle’s brake pedal, the engine will stop running and the parking
lights will turn off to indicate the engine has been shut off.
The Disabling the Remote Start System feature allows your system’s remote start unit to be
temporarily disabled, which prevents the vehicle from being remote started accidentally. This is
useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start,
move the optional remote start enable toggle switch to the “OFF” position.
Important! Timer Start should be used only in open areas. Never start or leave a vehicle running in
an enclosed area such as a garage or carport.
This unit can be programmed to auto-start and run the engine every 2 or 3 hours (3 hours is the
default setting). The engine will run for the programmed run time and then shut down. This
feature is designed to prevent the engine from freezing in cold climates.
A Maximum of Six Auto-Start Cycles can Occur.
Timer Starting
Turn Off Remote Start System
Toggle Switch Disable (If Installed)
Timer Starting Mode
PLUS6900-UM.qxp 4/30/09 3:48 PM Page 15