Cobra Electronics XRS 9845 - Manual (Page 9)

EasySet Menu
Your Detector
Nothing Comes Close to a Cobra ® 13
EasySet Menu
Your Detector
12 English
EasySet Menu gives you quick and easy access to all the settings on your detector.
It is used to select both:
■ User Settings (see page 16)
■ Alert Settings (see page 22)
Refer also to the Menu Flow Diagrams on pages 14 and 15 for User Settings
and Alert Settings to easily navigate to the setting you want to change. All
settings are stored in memory when the power is turned Off and will be recalled
when the power is turned back On.
NOTE
You cannot enter Menu mode during an alert. The unit will not detect signals
while in Menu mode.
During menu setting, if no buttons are pressed for 15 seconds, the unit will
automatically exit Menu mode and save the most recent settings.
If power is turned Off while in Menu mode, settings are saved to those
in effect before Menu mode was entered.
EasySet Menu Buttons:
■ Menu/Save button – Opens the Menu mode and Saves changes
made to settings.
■ Mute 6 button – Changes the option at the selected setting.
■ Dim 3 button – Moves counterclockwise through a setting loop.
■ City
4
button – Moves clockwise through a setting loop.
EasySet Menu
•
To use EasySet Menu:
1. Press and release the Menu/Save button to reach the opening menu screen.
2. Choose whether you want to change:
a. User Settings – press the Dim
3
button to enter the User Setting loop
shown on page 14.
b. Alert Settings – press the City 4 button to enter the Alert Setting loop
shown on page 15.
3. Press the Dim
3
or City
4
buttons to step backward or forward through
the chosen settings loop until the desired setting is reached.
4. Press the Mute 6 button to toggle the setting On or Off or to step
through its multiple choices. When some settings are turned On,
adjustments can be made by pressing the Dim
3 or City 4 buttons
to reach the desired value. Each setting will be retained when you
step to the next setting.
5. Repeat steps 3 and 4 to move to and set the next desired setting(s).
6. Press the Menu/Save button when finished to save the settings
and exit EasySet Menu mode. Or, simply wait 15 seconds without
pressing any buttons.
XRS9845_MANL_v.B:Layout 1 2/9/09 12:15 PM Page 12