Califone 2455AV-02 - Manual (Page 11)

10
Getting Started
continued
1. Insert a blank tape into cassette Deck 1.
2. Press the ‘PAUSE’ button then the ‘RECORD’ button on Deck 1 to prepare for recording. As the ‘RECORD’ button is pressed
the ‘PLAY’ button will follow.
3. Press ‘PAUSE’ again to start recording.
Dubbing (Recording from Tape 2 to Tape 1)
1. Insert a blank tape into cassette Deck 1, and the source or prerecorded tape into Deck 2.
2. Press the ‘PAUSE’ button then the ‘RECORD’ button on Deck 1 to prepare for recording. As the
‘RECORD’ key is pressed the ‘PLAY’ button will follow.
3. Press the ‘PLAY’ button on Deck 2, the ‘PAUSE’ button on Deck 1
will release automatically and recording will begin.
Note:
Every new cassette tape has erase prevention tabs.
Commercially prerecorded tapes have the tabs removed to
prevent recording over the original material or accidental
erasure. Cover the openings with adhesive tape if you wish
to record over such cassette tape.
To Stop Recording
Press the ‘STOP/EJECT’ button on Deck 2 or press the ‘PAUSE’ key on Deck 1 to momentarily stop recording.
Cueing with the Tape 1 Counter
Rewind the tape to the beginning. Press the ‘RESET’ button to reset the counter to (000). Use the Tape 1 Counter Display to note
precise points on an audio tape during playback and to cue the tape to those precise points using the ‘FAST FORWARD’, ‘CUE’,
or ‘REWIND/REVIEW’ buttons.
Compact Disc Player Operation
The 2455AV-02 Programmable Compact Disc Player plays both 12cm and 8cm CDs, CD-R, CD-RW without
requiring an adapter. Up to 20 tracks can be programmed for play.
Loading a Compact Disc
1. Lift to open the CD door and see “OPEN” on
the LCD display.
2. Place a CD in compartment with label side up.
3. Press the CD door down to close.
To pause a playing CD
Press the ‘PLAY/PAUSE’ button again. The pause indicator “II”
will appear on the display. Press ‘PLAY/PAUSE’ again to resume play.
Compact Disc Play
To play a loaded CD:
1. Turn power ON.
2. Set the ‘FUNCTION’ Selector to CD.
3. The LCD will show the number of tracks and playing time.
4. Press the ‘PLAY/PAUSE’ button.
The CD Display will show the current track and playing
time.