Bosch BSA2..UC User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Replacing the Microsan filter

(Omitted on vacuum cleaners which have a HEPA filter.)

When should I change the filter? Each time a new box

of dust bags is opened.

■ Open the covering.
■ Pull out the filter holding fixture and open up.
■ Dispose of the old Microsan filter and insert the

new one.

■ Slide the filter holding fixture in and close the

covering.

Cleaning the motor filter

■ Open the covering.
■ Unlock the insert by pressing in the direction of the

arrow and pull out.

Remove the motor filter and clean it.
Insert the cleaned motor filter.