Bosch SHU 3000 - Manual (Page 8)

The DLX series dishwashers (SHU 3012 UC and SHU
3016 UC) come with a lower rack that has two sets of
flipped down tines. With these models, if more space
is needed for pots and pans, the rear two sets of tines
can be folded to the down position. Rgure 5 shows the
lower basket with the tear sets of tines in the down
position to accomodate large pots.
Figure 5.
• Silverware should be mixed when placed in the
silverware basket. The purpose of mixing the
silverware is to avoid having them nest together, for
example if spoons would be placed together they
could nest together so that water could not properly
circulate across them to clean the surfaces.
• Silverware should be placed in the silverware basket
with the handles down, with the exception of the
knives, which in order to avoid accidentally cutting
oneself, should be placed with the handles up.
If you do inadvertently load the silverware basket with
the knife blades up it is recommended, to avoid cutting
yourself when unloading, that you remove the silverware
basket from the dishwasher and tip the contents out onto
a cutting board.
RACK HEIGHT ADJUSTMENT
The upper rack height of the The DLX series dishwashers
(SHU 3012 UC and SHU 3016 UC) is adjustable. There
are two positions, see figure 6:
“ 1. The upper position is used to provide more room for
items to he placed in the lower rack.
2. The lower position is used to provide more room for
items to be placed in the upper rack.
To reposition rack:
a. First empty upper rack and pull rack partially out to
point where rack can be lifted upward as shown in
upper illustration of Figure 6.
b. Pull the rack forward and then up until rollers are
completely free of channels.
_c. Reinsert the rack with the other set of rollers on the
channel.
Figure 6.
Extra Tall Items
If you have extra tali items that cannot fit in the lower rack
without interfering with the upper spray arm or without
hitting the upper rack, the upper rack may be removed. A
special “Extra Tall Item Sprinkler” is provided with the
dishwasher to allow use of the dishwasher with upper rack
removed. See figure 7.
Figure 7.
To allow washing of extra tall items:
1. With upper rack empty, remove it from the dishwasher
by pulling the rack partially out to the point where
rack can be lifted upward and out to disengage the
wheels from side rails.