Campbell Hausfeld CHN71500 - Manual

2
Attach air hose
to regulator outlet.
Adjust regulator
knob so outlet
pressure is between
60 psi and 100 psi.
1
Close pressure
regulator, Turn on
compressor and
Allow tank to reach
maximum pressure.
Setup Like a Pro
CHN71500 — Air Powered Pin Nailer
Pin Nailer
CHn71500
Attach coupler on
airhose to nailer inlet.
4
Load fasteners. See manual for further information regarding
length and type of fasteners.
3
© 2010 Campbell Hausfeld/Scott Fetzer
IN730500AV 6/10
Setup Like a Pro
Easy Setup Guide
Projects are easier with
Campbell Hausfeld products.
Thank you for deciding to purchase a Campbell
Hausfeld product. We are dedicated to providing
tools that help you to complete your projects
Like a Pro.
60
psi
100
psi
NOTICE: To operate this tool you will need
at least a 1 gallon compressor.
Press magazine latch button
and pull magazine open.
Close magazine. Load pins with points all the
way into the groove.
Visit us at chpower.com