beautypg.com

Tape copying (from deck i to deck ii), Set the rev mode switch, Set the tape transport direction – Pioneer CT-W603RS User Manual

Page 18: To stop copying, Tape copying

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

TAPE COPYING (from DECK I to DECK II)

• The tape copying function permits you to copy the contents of

a tape from DECK I to DECK II.

• The SYNCHRO COPY button is used to select either normal

speed copying, or high-speed copying (copying at twice the nor­
mal playback speed).

1. Load a tape for playback into DECK I and a tape for

recording into DECK II.

2. Set the REV MODE switch.
3. Set the tape transport direction.

• Tape copying is always performed in the direction indicated

by the tape transport indicator (►or -^). To change this direc­
tion, press the desired playback button (► or ◄), then im­
mediately press the stop ( ■ ) button.

4. Press the SYNCHRO COPY button to select either

NORMAL or HiGH speed.

NORMAL:

Tape copying at normal speed allows listen

during playback (COPY indicator lights
steadily).

HIGH:

Tape copying at twice the normal speed

(COPY indicator flashes). Playback will still

audible.

To stop copying

Press the stop ( ■ ) button of either deck. Both decks will stop.

NOTES:

• The tape in DECK // will be copied in the same type of the DOL­

BY NR switch as DECK I's tape, regardless of its own setting.

When listening to the copied tape, set the type of the DOLBY

NR switch on DECK /.

If a nearby television set is on while high-speed copying is be­

ing performed, a high-pitched interference sound may be heard
on the tape. In this case, either use the normal speed copying
function, or turn off the television.

During high-speed copying, none of the operation buttons will

function except for the stop iU ) button.

During normal speed copying, the recording mute ( QI and

pause IH) buttons of deck H also function.

• Tape copying is cancelled when either of the two tapes reaches

the end. Therefore, it is advisable to use tapes of the same

length.

The sound quality of the copied tape will be somewhat less than

the original. Therefore when making more than one copy, al­
ways record from the original tape (do not make a copy of a

copy).

The recording level adjustment is not necessary during tape

copying.

18


En

This manual is related to the following products: