Pioneer Pro DVD Recorder PRV-9200 - Manual (Page 7)

PRO DVD RECORDER
IEEE-1394/DV Input/Output (i.LINK)
DV input allows users to record digital component video content from a DV source
such as a DV camera, tape deck or DV output from a computer * The PRV-9200
can take the DV source and record directly to the internal HDD or direct to a DVD-R
or DVD-RW disc. The PRV-9200 can be used as a video source connected to another
DV recording device using the IEEE-1394 port. Using the PRV-9200's remote control
you can also control a DV type*" digital video camera's play, stop, pause and other
basic functions. The Graphical User Interface (GUI) allows for smooth transfer of
dubbing to DVD-R or DVD-RW media.
'Usi'tg a computer the reco'der conte-n can be captjrsc. bj( the recorder cannot be controlled.
'•Remote ccntrol o1 some cameras is not possible. The recorder cannet be controlled from a DV cortroller device, such as a PC video editing s^em
DV (i. LINK) terminal
m
PC
mm s a 3
GO __^
i
->r
PRV-9200
DV terminal
(Digital Video camera with built-in LINK)
LINK
OV (i. LINK) terminal
When recordirg f'Oit the OV input port in VR 'ormat. there is a limit cr the iransler raie setting ir order to meintain the highest videc quality' possible.
■iLINK“ ca'Kt be ocrnectod to DVD players andAV anplifers.
Front Panel DVD indicator Disc tray Display
HDD indicator
r
IR remote sensor STOP REC button ONE TOUCH COPY button
STANOBY/ON button
- - - - - - - 1
f*
a
1
I_ _ _ _ _ _ _ _ _ _ _ _ _ _ I
# • V
Front panel Inputs
W
OPEN/CLOSE button
STOP PLAYBACK button
DV IN/OUT jack
+/- buttons
REC button
AUDtOA/IDEO INPUT 2
AUDIO/VIOEO OUTPUT 1
VHF/UHF IN/OUT I AUDIO/VIOEO INPUT1
PLAY button
OPTICAL DICrTAL OUT
Rear Panel
AUDIOi'VIDEO OUTPUT 2 '---------CONTROL IN
COMPONENT VIDEO OUT AUDIO/VIDEO INPUT 3 AC IN