Concord Camera Eye-Q 5062AF User Manual
Page 6
4
En
USING THE ZOOM
Press T (tele) to zoom in your subject, and press W (wide) to zoom out or return to the normal mode.
1x - 4x Zoom
The image increases in size on the LCD.
6x Digital Zoom
The image contained within the red frame is the image recorded.
CLOSE-UP SHOOTING
1. Press button. The Macro icon ( ) will be displayed on the LCD.
2. Frame the subject in the LCD.
• The best shooting range is from 15 cm to 70 cm. (6 in. – 28 in.)
3. Press the shutter button half-way to activate the focus until the green AF LED stops blinking and the AF
frame turns green.
4. Press the shutter button fully to take the picture.
TAKING CONTINUOUS PICTURES
1. Press button. The Continuous Shot icon ( ) will be displayed on the LCD.
2. Frame the subject in the LCD screen and press the shutter button half-way to activate the focus until the
green AF LED stop blinking and the AF frame turns green.
3. Press the shutter button fully to capture the pictures.
• The camera will automatically capture 7 continuous images at approximately 3 images per second in 1600
x 1200 resolution.
4. If you do not want to take continuous pictures anymore, press button until disappears from the LCD.
Note:
• In continuous shooting mode the flash is disabled as the recharging time will slow it down.
• The LCD will be blank when the images are taken in the Continuous Shooting Mode.
A
AWB
A
AWB
4
7
8
9
LCD Display
Actual Image Recorded
Original Size
Actual Image Recorded
4x Zoom LCD Display
A
AWB
A
AWB
4
M
28/45
A
AWB
A
AWB
A
AWB
4
M
28/45
A
AWB
A
AWB
A
AWB
6x Digital Zoom
DZ5062 QSG(514174-00)-E 4
5/31/04, 4:14:23 PM