Direct recall, Note, Entering the function menu – Pioneer GEX-P7000TVP User Manual

Page 13: Preset scan, Switching the tuning mode, Using the pgm button, Press the pgm (pgm/dsp) button, Entering the setting menu

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Direct Recall

• Press one of buttons 1-6 to recall a station preset under that button.

Note:

• To recall Preset channels 7-12, perform Preset Tuning with

A/T

buttons.

Entering the Function Menu

• Press the FUNCTION button to select the desired mode in the Function

Menu.

Each press of the FUNCTION button selects the mode in the following order:

FUNC 1 (Preset Scan/BSSM) -► FUNC 2 -► FUNC 3 -► FUNC 4

-► AUTO/MANUAF (Switching the Tuning Mode)

Note:

• In FUNC 1, Preset Scan or BSSM is selected by changing the length of time you press the

A/T

button.

• There are no functions in FUNC 2, FUNC 3 or FUNC 4.

Preset Scan

This lets you view up to 12 stations stored in the Preset Channels one after the other.

Switching the Tuning Mode

You can select between Manual Tuning (MANUAF) and Seek Tuning (AUTO). Press the

◄/► button and tuning is performed in the selected tuning mode.

Using the PGM Button

The PGM (PGM/DSP) button operates in a different way depending on the function
programmed (memorized). (For details concerning programming the PGM (PGM/DSP)
button, refer to the Head Unit’s operation manual.)

• Press the PGM (PGM/DSP) button.

Function

Press

Hold for 2 seconds

Preset Scan/BSSM (FUNCl)

Preset Scan ON/OFF

BSSM ON/OFF

Switching the Tuning Mode

Select

(AUTO/MANUAL)