Corega BTHS02 - Manual (Page 12)

BTHS02 User Manual
28 29
6.1 Charging the headset
The headset comes with an embedded rechargeable battery. For first
time use, it should takes about 4 hours to fully charge the battery. After-
ward, it takes about 2 hours to fully charge. With battery fully charged,
the talk time is about 6 hours, and the standby time will be about 160
hours.
1. Connect the DC Jack Connector with transferred connector as
picture shown below.
2. Connect the other side of transferred connector to the rechargeable
port of the headset.
3. Plug the charger into the socket of the power supply.
4. Both red and green LEDs of transferred connector will light up.
DC Jack Connector
(Suitable for Nokia Mobilephone)
Power
Supply
Red (Green) LED
Charger
* Note:
1. When the red indicator of the headset starts to flash, it indicates that the
headset is running low on battery. Charge the headset for 2 hours until the red
indicator turns off.
2. The headset doesn’t work while charging.
6
Function Specification