Kenmore 625.38454 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of Contents
Planning Your Installation ............................................................................................................................................................3
Tools and Materials Needed......................................................................................................................................................... 3
Typical Undersink Installation..................................................................................................................................................... 4
Installation Steps..........................................................................................................................................................................5-7
Step 1 - Install Cold Water Supply Fitting....................................................................................................................... 5
Step 2 - Make Hole for Filtered Water Faucet....................................................................................................................6
Step 3 - Assemble and Install Filtered Water Faucet ....................................................................................................... 6
Step 4 - Make Tubing Connections....................................................................................................................................7
Filter Cartridge Installation / Replacement ................................................................................................................................8
Using the System ........................................................................................................................................................................... 9
Filter Cartridge Life ....................................................................................................................................................................... 9
Exploded View & Parts List ..................................................................................................................................................10-11
Planning Your Installation
When planning your installation, use the drawings on pages 4 & 5 to guide you. There are many things to consider
as you plan:
The water filter housing inlet and outlet connections
are 1/4" Quick Connect (push-to-connect)
Existing plumbing type (copper, threaded, etc.) and
nominal size (1/4", 3/8", etc.)
Tools required (see below)
Your plumbing skills
Cost of materials needed
Space available for installing the filter housing
The possibility of water spilling from sump when
replacing filter cartridges
Make a simple sketch of your proposed installation, and a list of plumbing materials you will need. Obtain every
thing you need before starting the installation. Be sure you have the tools required.
Tools and Materials Needed
Plumbers' Putty
Slotted and Phillips Screwdrivers
Pliers and Adjustable Jaw Wrench
▼ Tubing Cutter
▼ Sandpaper or Emery Cloth
▼ Electric Drill & 3/4" Drill Bit, if mounting hole is
needed for the faucet
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com