beautypg.com

Kenmore 25328452805 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PROBLEM

CAUSE

CORRECTION

SOUND AND NOISE (Coni)

Popping or cracking sound
when compressor comes on.

Metal parts undergo expansion

and contraction, as in hot water

pipes.

This is normal. Sound will level off or disappear as

freezer continues to run.

Bubbiing or gurgiing sound,
iike water boiling.

Refrigerant {used to cool

freezer) is circulating
throughout the system.

This is normal.

Vibrating or rattling noise.

Freezer is not level. It rocks on

the floor when it is moved
slightly.

»

Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.

Freezer is touching the wall.

Level the unit. Refer to "Leveling" in the First Steps

Section.

Ensure floor can adequately support freezer. Level the

freezer by putting wood or metal shims under part of the
freezer.

Relevei the freezer or move freezer slightly. Refer to

"Leveling" in the First Steps Section.

WATER/MOISTURE/FROST INSIDE FREEZER

Moisture forms on inside
freezer walls.

Weather is hot and humid,

which increases internal rate of
frost build-up.

Door may not be seating

properly.

Door is kept open too long, or

is opened too frequently.

This is normal.

See "DOOR PROBLEMS" Section.

Open the door less often.

WATER/MOISTURE/FROST OUTSIDE FREEZER

Moisture forms on ouside of
freezer.

Door may not be seating

properly, causing the cold air

from inside the freezer to meet
warm moist air from outside.

See "DOOR PROBLEMS" Section.

ODOR IN FREEZER

Odors in freezer

Interior needs to be cleaned.

»

Foods with strong odors are in

the freezer.

Clean interior with sponge, warm water, and baking
soda.

Cover the food tightly.

DOOR PROBLEMS

Door will not close.

Freezer is not level. It rocks on

the floor when it is moved
slightly.

Floor is uneven or weak.

Freezer rocks on floor when it
is moved slightly.

This condition can force the cabinet out of square and

misalign the door. Refer to "Leveling" in the First Steps
Section.

Level the floor by using wood or metal shims under the

freezer or brace floor supporting the freezer.

LIGHT BULB IS NOT ON

Light bulb is not on.

Light bulb is burned out.

»

No electric current is reaching

the freezer.

Follow directions under "Interior Light" in the Freezer

Features Section.

See "FREEZER DOES NOT RUN" Section.

fri

в

п.

ш

13