Operation, Control panel, To operate the dehumidifier – Kenmore 580.53301 User Manual
Page 6: Note: be careful not to lose the water bucket
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
CONTROL PANEL
Your dehumidifier has a control panel containing an indicator and two controls —
Auto Shut-Off, Fan Speed, and Humidity Control.
Auto Shut-Off —This lamp glows when the bucket fills or is missing.
Fan Speed — This controls the speed of the airflow.
Humidity Control— This controls the moisture in the room.
TO OPERATE THE DEHUMIDIFIER:
1. Turn the Humidity Control to Off. Plug the power supply cord into an electrical outlet.
2. The Humidity Control can be set anywhere between Off and Max for normal operation.
If you need more dehumidification, turn the Humidity Control toward Max. If you need less
dehumidification, turn the Humidity Control toward Oft.
3. Turn the Humidity Control to Off to stop the unit manually.
4. If you want to control the speed of air flow, turn the Fan Speed toward Low or High.
Note: Be careful not to lose the water bucket.
This dehumidifier doesn't run if the water bucket is not installed properly.
- 6 -