Converting the lower element (cont’d), Installation instructions (cont’d) – Kenmore POWER MISER 153.327164 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions (cont’d)
Converting the Lower
Element (cont’d)
9. Replace terminal cover on thermostat making sure that the
locking tabs on the terminal cover are in place.
12, Complete wiring to the water heater, or if completed, turn
“ON” electric power to the water heater after filling the
tank with water.
A WARNING
Make sure the thermostat is flush against the tank, the
terminal cover is in piace, and the insuiation is repiaced.
Faiiure to do so can result in DEATH, SERIOUS BODILY
INJURY, OR PROPERTY DAMAGE.
10. Replace the insulation block so that it completely covers
the thermostat and element.
A CAUTION
Never use this water heater unless it is completely full of
water. To prevent damage to the tank and heating ele
ment, the tank must be filled with water. Water must
flow from the hot water faucet before turning “ON”
power.
11. Replace the access panel.
12