Kenmore DELUXE 625.3844 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TABLE OF CONTENTS
Typical Installation Drawings / Tools and Materials Needed............................... 4
Water Filter Housing Installation ............................................................................. 5-7
Filtering All House Water...................................................................................5-6
Using Compression Fittings............................................................................. 5
Using Soldered Copper.................................................................................... 5
Using Threaded Fittings .................................................................................. 6
Filtering Water To One Faucet (Installing Under Sink) ...................................... 7
Installing Filter Cartridge ................................................................................ 7
Filter Cartridge Life / Replacement.......................................................................... 8-9
PLANNING YOUR INSTALLATION
When planning your installation, first read the filter
cartridge information on page 8, and decide where
to locate the water filter housing. Then use the draw
ings on page 4 to guide you. There are many vari
ables to consider as you plan. Some of these are:
K* the water filter housing inlet and outlet internal
threads are 3/4" NPT.
y" existing plumbing type (copper, threaded, etc.)
and nominal size (1/2", 3/4" etc.)
y tools you have and your plumbing skills
y* cost of materials needed
y" space available for installing the filter housing
Make a simple sketch of your proposed installation
and a list of plumbing materials you will need. Ob
tain everything you need before starting the installa
tion. Be sure you have the tools required.