Stopping unit during operation, Figure 1 – Kenmore 625.344800 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW YOUR PURIFIER WORKS
The Purifier distills and turns ordinary tap water into
clean, clear purified water. Uses for purified water in
clude drinking, cooking, icecubes, salt-restricted diets,
baby formulas, steam irons, photo processing, and
cleaning contact lenses.
By heating water to boiling, the water is changed to
steam, which rises. As the steam cools and turns back
into water, it is collected in the carafe. Impurities are left
behind in the kettle.
Purified water will remain fresher-tasting if it is kept
tightly capped. Also shaking the carafe before pouring
will aerate the water and make it taste better.
Order extra carafes from Sears (see page 6) so you
can chill one bottle of purified water while you make
more.
STOPPING UNIT DURING OPERATION
1. Remove Kettle.
2.
Unplug unit from outlet.
BEFORE USING WATER FROM YOUR WATER PURIFIER FOR THE FIRST TIME
Although care is taken so your Purifier and plastic stor
age bottle are clean, some harmless matter may remain
from manufacturing, packaging, or shipping. This could
leave an unwanted taste or odor in the purified water the
first time you use it. To remove any taste or odor caus
ing matter, do the following.
1.
Set the Purifier on your counter or tabletop.
2.
Remove kettle from its receptacle.
3.
Remove kettle cover by twisting counter clock
wise, then lift.
4.
Wash inside of kettle with soap and water, rinse
and fill the kettle to the “max” line.
5.
Replace the cover onto the kettle. Twist clock-
wiseto lock. Plug the kettle into the base recep
tacle.
6.
Wash carafe and lid with soap and water, then
rinse.
7.
Place the carafe on the base unit, and plug the
power cord into a wall outlet.
8.
Press the "RESET” button to turn the Purifier on.
Run one batch of water to the carafe. Unplug the
kettle
from the base unit.
9.
Steam will continue to passthrough for afew min
utes. After unit cools, rinse out kettle.
10. Shake the carafe, then discard the first batch of
wafer.
FIGURE 1
Kettle with cover
Carafe with cover
Base Unit
Reset Button