How to load the clothes, Eneigy-saving tips – GE DDE0580G User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrinkled.
Loads should look like this:
QeaH the lint filter before
drying every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other comer.
For additional information on lint
filter, see page 13.
Eneigy-Saving Tips
® Sort clothes by weight so you won’t
have to run an extra cycle for one or
two heavier, slower-drying items.
See page 8.
® Do not overload dryer. For
efficient drying, clothes need to
tumble freely.
® To help prevent ironing, use
Knits/Low Heat. Remove garments
promptly at end of drying cycle and
place on hangers.
® The hotter the drying
temperature, the more the energy
that will be used. Use lowest
possible setting that will dry the
Inarl in rpasnniihlp Hmi»
® Dry your clothes in consecutive
loads. Using a ^*warm
save energy.
’» j____ :ii
Uiyci Will
® Clean dryer lint filter each time
you dry.
® Clean diyer exhaust ducting at least
once a year. A partially clogged
exhaust can lengthen drying time.