beautypg.com

Chamberlain SL 1000-X3 User Manual

Page 36

background image

Rev J

Doc 01-20098

Page 36 of 44

INSIDE/OUTSIDE INTERRUPT LOOP DETECTOR (TB16)

IF GATE TYPE IS SWING OR LINEAR (ATG IS NOT FUNCTIONAL):

Inside Interrupt Loop:

Activation stops an opening or closing gate and deactivation opens
the gate.

Outside Interrupt Loop:

Activation opens a closing gate.

IF GATE TYPE IS SLIDE OR BARRIER AND ATG IS OFF:

Inside Interrupt Loop:

Activation opens a closing gate.

Outside Interrupt Loop:

Activation opens a closing gate.

IF GATE TYPE IS SLIDE OR BARRIER AND ATG IS ON:

Inside Interrupt Loop:

Activation/deactivation closes an opening gate. Activation stops a
closing gate and deactivation closes the gate.

Outside Interrupt Loop:

Activation stops a closing gate and deactivation closes the gate.

INSIDE/OUTSIDE PHOTO-SENSOR (TB3)

IF GATE TYPE IS SWING OR LINEAR:

Inside Photo Sensor:

Activation stops a moving gate and deactivation restarts the gate.

Outside Photo Sensor:

Activation stops a closing gate and deactivation restarts the gate.

IF GATE TYPE IS SLIDE OR BARRIER:

Inside Photo Sensor:

Activation stops an opening gate and deactivation restarts the
gate.

Outside Photo Sensor:

Activation stops a closing gate and deactivation restarts the gate.

INTERRUPT BAR INPUTS (TB11)

INTERRUPT BAR Activation causes gate to stop and reverse a few inches.

INS./OUTS. INT. SENSE / SHADOW SENSE / EXIT SENSE (TB12/TB13/TB14/TB15)

INPUTS

INSIDE

Input from an Inside Interrupt loop provides the signal for an

INTERRUPT

optional LiftMaster loop detector add-on board. Operation is the
same as the Interrupt Loop SENSE input, above.

OUTSIDE

Input from an Outside Interrupt loop provides the signal for an

INTERRUPT

optional LiftMaster loop detector add-on board. Operation is the
same as the Interrupt SENSE

Loop input, above.

SHADOW

Input from shadow loop provides signal for optional LiftMaster loop

SENSE

detector add-on board. Operation is the same as Shadow Loop
input, above.

EXIT

Input from exit loop provides signal for optional LiftMaster loop

SENSE

detector add-on board. Operation is the same as Exit Loop input,
above.

RADIO INPUT (TB6)