Problem, Things to check, Troubleshooting – GE 840072900 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 4 0 0 7 2 9 0 0 E v 0 4 9 / 2 0 / 0 0 1 6 : 4 4 P a g e 9
5. Wrap cord loosely around cord wrap
and set on heel.
If you have the
retractable cord fea
ture, use the reel to
wind and store the
cord as described in
the “Retractable Cord” section. Never
store iron sitting flat on the soleplate.
This will damage the inside of the
soleplate. Always store iron on its heel
in upright position.
Troubleshooting
PROBLEM
Iron won’t heat.
Water is leaking
out of the iron.
Iron won’t steam.
Iron leaves spots
on clothing.
Ct)rd is kinked
<.>r twisted.
THINGS TO CHECK
• Is (he iron plugged in and the .\utn Shutoll Reset
Button/Ijghl on? If noi, ()iess the Auto Shutoff Reset
Button/T.ight to turn the iron back on.
• If the iron is plugged in and the light does not come on,
check the cjutlet b> plugging in a lamp.
• Is the Tcmperaiure/Steam Dial turned to a fabric setting?
• If you over filled the water tank, empty some water.
• Is the Temperature/Steam Dial in the steam range and
did the iron have enough time to preheat?
• If ironing for more than one hour the auto shutoff may
have turned the iron off. Press the Auto Shutoff Reset
Button/Light to turn the iron back on.
• Is there water in the water tank?
• Is the Temperature/Steam Dial set in tlie steam range
and did the iron have enough time to preheat?
• Has the iron been cleaned with the .self
The steatn vetU-s tnay be blocked.
• ALWAYS empty the water tank of the iron after using.
Water left in the tank may discolor.
• Clean the steam vents as instructed in the “Self-Clean
System” section.
• Lhiplug iroti and let
cim
)|. Hold iron cord in tlic middle
of entire length. Let plug and iron dangle freely until
cord uttcoils. This will extend the life of your iroti cord.