Talkswitch CT.TS005.002501.UK User Manual

Page 12

H T T P : / / G L O B A L . T A L K S W I T C H . C O M

1 1

STEP 8 — AUTO ATTENDANT AND VOICEMAIL GREETINGS

If you have set up an Auto Attendant, as described in Step 4 of this guide — Configure
an Automated Attendant, then you should load or record a greeting now.

What should an Auto Attendant say?

The following is an example of a typical Auto Attendant greeting:

"Welcome to the ABC company. If you know your party's three-digit extension you may
dial it now. To reach reception, press '0' or stay on the line."

To load a pre-recorded Auto Attendant greeting

You can load a professionally pre-recorded greeting to
TalkSwitch by following these steps:

1. Click on

Load Auto Attendant..

2. An information box opens asking whether or not to

continue. Click

Yes and follow the instructions.

The file must be an 8khz, 8-bit, mono,

µ-law .wav file.

A sample greeting (Auto Attendant Sample.wav) is
provided in your TalkSwitch folder.

Record an Auto Attendant greeting

To record an Auto Attendant greeting for Auto Attendant 1:

1. Pick up any telephone connected to the TalkSwitch. You should hear a dial tone.

2. Press

then

3. Follow the prompts to record your message. When your greeting is complete,

press

to end the recording.

Set up and record voicemail

To set a password, record a personal greeting, and record your name for the company
directory:

1. Pick up any telephone connected to TalkSwitch. You should hear a dial tone.

2. Dial

and your mailbox number. Your mailbox number is equivalent to

your extension number.

3. Follow the prompts to set a password, record a personal greeting, and record your

name for the company directory.

For complete details, refer to Quick Guide Configuring Auto Attendants, and/or
TalkSwitch User Guide.