To start your air conditioner, Your air conditioner, How to start and use your air conditioner – Whirlpool AC1 352 User Manual
Page 3: Energy saving tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Do not use rubbing alchol or flammable toxic
solvents, such as acetone, gasoline carbon
tetrachloride, etc. These can damage the
material. Do not use a sharp instrument or any
harsh or abrasive cleaners.
Energy Saving Tips
Improve home insulation (seai doors, windows,
and cióse fireplace flue).
Close blinds or drapes on sunny side of house.
Add window awnings.
Keep air filter clean. Don’t block air flow with
drapes or furniture.
Ventilate attic (high temperature levels add to
normal cooling load).
Try not to use heat producing appliances during
the hottest part of the day. Turn lights, radios,
televisions, and other appliances off when not
needed.
Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
Use a vent fan in areas In cooking, laundry or
bathing areas to pull out extra heat and moisture
near its source.
HOW TO START AND USE
YOUR AIR CONDITIONER
WARNING: To prevent electrical hazard, plug unit
only into eiectricai outiet. DO NOT use an
extension cord.
NOTE: Be sure air conditioner control is set to UNIT
OFF before plugging in the unit.
FRESH AIR/
EXHAUST CONTROL
FAN SPEED
CONTROL
ENERGY SAVER
CONTROL
THERMOSTAT
To start Your Air Conditioner
1
. Set the
FRESH AIR/EXHAUST CONTROL
to OFF
tor maximum cooling.
2.
Set the
FAN SPEED CONTROL
to the desired
setting.
QUIET COOL
................for sleeping comfort
REGULAR COOL
............ for normal cooling
MAX COOL
................ for maximum cooling
FAN ONLY
.................for air circulation only
CAUTION: iF YOU TURN YOUR AiR
CONDiTiONER OFF, WAIT AT LEAST TWO
(2) MINUTES BEFORE TURNING IT BACK
ON OR YOU MAY BLOW A FUSE.
3.
Turn
THERMOSTAT CONTROL
to the mid (Number
6) setting. You can adjust the air conditioner’s
cooling performance by resetting the thermostat
control to a higher number for maximum cooling.
You will need to experiment to find the setting which
suits you best.
When lowering the thermostat control setting, the
compressor (motor) may shut off. When the
compressor is turned off with either the fan speed
control or the thermostat control, wait 2-3 minutes
before restarting the air conditioner or turning the
compressor back on.