Changing the control settings, Adjusting the door bins – Whirlpool EB21DK User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 21.)
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
CONDITION:
REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator
Door opened often
Refrigerator
4
Section is
TOO WARM
Large amount of food added
Room temperature too warm
Freezer
B
If Freezer
Door opened often
Refrigerator
3
Section is
Large amount of food added
Freezer
Between
TOO WARM
Very cold room temperature
(can’t cycle often enough)
B and C
If Refrigerator
Controls not set correctly
Refrigerator
2
Section is
TOO COLD
for your conditions
Freezer
B
If ICE isn’t
Heavy ice usage
Refrigerator
3
MADE FAST
Very cold room temperature
Freezer
Between
ENOUGH
(can’t cycle often enough)
B and C
If BOTH
Door opened often
Refrigerator
4
SECTIONS
Large amount of food added
Freezer
Between
are TOO WARM
Very warm or very cold room
temperatures
B and C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.