Whirlpool WHKM-D30 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating the Water Cooler
To operate model WHKM-D10
A. Power ON/OFF button
B.
Hot water ON/OFF button
C.
Cold water ON/OFF button
1. Press the power button to turn power on to the water cooler.
When the light flashes, the water cooler is connected to
power but is turned off. When the light is lit, water cooler is
on.
2. Select either Hot or Cold. When the light flashes, there is
power to the unit, and the water is heating or cooling. The
light will remain lit after the water has been heated or cooled.
It will turn off when the hot or cold water is turned off.
To operate model WHKM-020
A. Power ON/OFF button
B. Hot water ON/OFF button
C.
Hot water temperature selector button
D. Cold water ON/OFF button
£ Cold water temperature selector button
1. Press the power button to turn power on to the water cooler.
When the light flashes, the water cooler is connected to
power but is turned off. When the light is lit, water cooler is
on.
2. Press either Hot On/Off or Cold On/Off. The light will turn on
when there is power to the hot or cold water system. It will
turn off when the hot or cold water is turned off.
3. Press either Hot/Select or Cold/Select. Continue to press the
selected button until the desired water temperature light is lit
(hot to hottest or cold to coldest). When the light flashes,
there is power to the unit, and the water is heating or cooling.
The light will remain lit after the water has been heated or
cooled.