Before using your refrigerator, Cleaning it, Plugging it in – Whirlpool 4ET18ZK User Manual
Page 5: Installing it properly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE USING YOUR REFRIGERATOR
Before Using Your
Refrigerator
In This Section
Page
Cleaning it................................................................. 5
Plugging it in............................................................ 5
Page
Installing it properly..............................................5
Leveling it..............................................................
6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces
sary. See cleaning instructions on page 13.
Plugging it in
Recommended Grounding Method
A 220 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
Installing it properly
1.
2.
Allow 1.25 cm
('/2
inch) space on each side
and at the top of the refrigerator for ease of
installation.
If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
The refrigerator can be flush against the wall.
□