Using the exhaust vent control, Changing air direction – Whirlpool ACE184XD0 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R A I R C O N D I T I O N E R
Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set Exhaust Vent Control to OPEN.
2. Set Selector Control to desired setting
(COOL. HEAT, or FAN ONLY).
3. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN).
4. Set Thermostat Control to desired setting.
EXHAUST VEJ'JT
dD
To circulate room air:
1. Set Exhaust Vent Control to CLOSED.
2. Set Selector Control to desired setting
(COOL. HEAT, or FAN ONLY).
3. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN).
4. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room air
circulation is desired.
aD
Changing air direction
The air direction cartridges on both sides of
the unit control the direction of the cooled
air. The air direction cartridge rotates to
direct the air straight ahead or to the sides of
the unit. The louvers in each air direction
cartridge are operated by a tab. Use the tab
to direct the air up. down, or straight ahead.