Changing the light bulb, To change refrigerator light, Ice cube trays – Whirlpool 6ETl6ZK User Manual

Page 8: To remove ice, Changing the light bulbs

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using Your Refrigerator
Continued

YmrsM

Changing the light bulb

warning

Electrical Shock Hazard

Before removing the light buib, either
unplug the refrigerator or disconnect the

electricity leading to the refrigerator at the
main power supply. Shock and injury can
occur if electricity remains connected.

To change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt appliance bulb.

5. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit

your refrigerator. Be sure to replace bulb with one
of the same size and shape.

Reversing the door swing

You can change the hinges on your refrigerator so
the doors open the other way. Refer to the instruc
tion sheet included with your refrigerator.

Ice cube trays

If cubes are not used, they may shrink. The

moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.