Changing the control settings, Adjusting the door bins – Whirlpool EB21DKXDB01 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R R E F R I G E R A T O R
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in refrigerator or
freezer, use the settings listed in the chart below as
a guide. If you have any questions, call our Consumer
Assistance Center number, 1-800-253-1301, from
anywhere in the U.S.A.
CONDITION:
REASON:
RECOMMENDED SETTINGS:
Refrigerator Freezer
Refrigerator
section too warm
• Door opened often
• Large amount of food added
• Room temperature too warm
4
B
Freezer section
too warm
• Door opened often
• Large amount of food added
• Very cold room temperature
(can’t cycle often enough)
3
Between
B and C
Refrigerator
section too cold
• Controls not set correctly for your conditions
2
B
Ice not made
fast enough
• Heavy ice usage
• Very cold room temperature
(can’t cycle often enough)
3
Between
B and C
Both sections
too warm
• Door opened often
• Large amount of food added
• Very warm or very cold room temperatures
4
Between
B and C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
0
Support button
0
________ ^
o