Removing the base grille to remove the grille, Ice cube trays, Oqom – Whirlpool 6ET18RK User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Metal clips
'Condenser coils
' Defrost pan
'Support tabs
Removing the base grille
To remove the grille:
1. Open the freezer door.
2. Pull grille out.
3. Do not remove Tech Sheet fastened behind
grille.
To replace grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the door.
See cleaning instructions for defrost pan and
condenser coils on page 11.
Reversing the door swing
You can change the hinges on your refrigerator
so the doors open the other way. Refer to the
instruction sheet included with your refrigerator.
Ice compartment door
Pull the ice compartment door panel out from the
bottom and slide it to the rear.
OQOM
l
Ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.